INCH-POUND
MIL-PRF-24613A(SH)
3 November 2007
SUPERSEDING
MIL-PRF-24613(SH)
21 March 1983
PERFORMANCE SPECIFICATION
DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the performance requirements for cosmetic polymeric deck covering
materials to be applied either directly over primed or unprimed, clean steel and aluminum interior deck surfaces, or
over deck covering underlay materials conforming to MIL-PRF-3135, that provide a wear resistant, low
maintenance deck surface.
1.2 Classification. Deck covering materials should be of the following types, classes, and grades, as specified
(see 6.2):
1.2.1 Types.
a.
Type I Epoxy resin based materials that require an initial seal coat.
b.
Type II Polyurethane or polyurea based materials that require an initial seal coat.
c.
Type III Epoxy resin based materials that do not require an initial seal coat.
d.
Type IV Polyurethane or polyurea based materials that do not require an initial seal coat.
e. Type V Epoxy resin based materials that do not require periodic sanding or resealing at any time
throughout an expected ten-year service life.
f. Type VI Polyurethane or polyurea based materials that do not require periodic sanding or resealing at any
time throughout an expected ten-year service life.
1.2.2 Classes.
a. Class 1 Clear or colored resin base with colored quartz aggregate to provide the final cosmetic
appearance.
b. Class 2 Colored resin base material with color flakes and a clear seal coat added to provide the final
cosmetic appearance.
c.
Class 3 Clear or colored resin base with marble chip aggregate to provide the final cosmetic appearance.
d. Class 4 Products consisting of two or more different colors of resin base materials that are mixed in order
to provide a specific final cosmetic appearance.
1.2.3 Grades.
a.
Grade A For use onboard submarines
b.
Grade B For general shipboard use
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05M3, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160
or emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5610
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business