A-A-1272 - Plaster, Gypsum (Spackling Compound)
This description covers powder intended for filing small cracks, scars, or imperfections in interior plaster and paste intended to fill small cracks, scars and slight imperfections in plaster, tile or mosaics, knotholes and nail holes in wood.
A-A-214 - Asphalt Roof Coating (Brushing And Spraying Consistency) (S/S By Astm-D2823)
A-A-215 - Asphalt Roof Cement
A-A-909 - Cement: Keene S (S/S By Astm-C61/C61M)
A-A-910 - Asphalt Cement (Viscosity Grades) (S/S By Astm-D3381)
A-A-911 - Asphalt Cement (Penetration Grades) (S/S By Astm-D 946)
A-A-912 - Roofing Coating, Asphalt-Emulsion (S/S By Astm-D1227)
A-A-913 - Asphalt, Petroleum (Primer, Roofing And Waterproofing) (S/S By Astm-D41)
This description describes a cut-back primer used with asphalt in dampproofing and waterproofing above or below ground level, for application to concrete or masonry surfaces.
A-A-914 - Cutback Asphalt, Rapid Curing (S/S By Astm-D2028)
This commercial item description covers asphalt cutback of the rapid-curing type for use in the construction and treatment of pavements.
A-A-915 - Cutback Asphalt, Medium Curing (Use Astm D 2027)
A-A-916 - Asphalt, Roofing (Hot Cement, Mopping Coat) (S/S By Astm-D312)
This commercial item description covers four types of asphalt used primarily in the construction of built-up roof coverings laid either over boards or conrete on various inclines.
ACI116 - Cement & Concrete Terminology(No S/S Document)
This report is the authoritive glossary for cement and concrete technology.
ACI201.1 - Concrete In Service, Guide For Making A Condition Survey Of
ACI201.2 - Concrete, Durable, Guide To
ACI201.2 - Concrete, Durable, Guide To
ACI207.1 - Concrete, Mass
ACI207.2 - Concrete, Massive, Effect Of Restraint, Volume Change, & Reinforcement On Cracking Of
ACI207.4 - Concrete, Mass, Cooling & Insulating Systems For
ACI210 - Concrete In Hydraulic Structures, Erosion Of
ACI211.1 - Concrete, Selecting Proportions For Narmal, Heavyweight, And Mass
This Standard Practice describes methods for selecting proportions for hydraulic cement concrete made with and without other cementitious materials and chemical admixtures.
ACI211.2 - Selecting Proportions For Structural Lightweight Concrete, Standard Practice For
Discussion in this standard is limited to structural grade, lightweight aggregates and structural, light-weight aggregate concretes.
ACI211.3 - Concrete, No Slump, Selecting Proportions For
The ACI standard "Recommended Practice for Selecting Proportions for Normal Weight and Heavyweight Concrete presents the details of a method for proportioning concrete having consistencies, as measured by the slump test, in the range of 1 to 7 in.
ACI213 - Concrete, Structural Lightweight Aggregate, Guide For
ACI214 - Concrete, Eveluation Of Strength Test Results Of
The purpose of strength tests of concrete are to determine compliance with a strength specification and to measure the variability of concrete.
ACI221 - Aggregates. Normal Weight In Concrete, Guide For Use Of
Aggregates, the major constituent of concrete, are critical to the performance of both freshly mixed and hardened concrete.
ACI223 - Concrete, Shrinking-Compensating, Use Of
This standard practice is directed mainly toward the use of shrinkage - compensating concrete in structures, precast concrete products, reinforced and post-tensioned slabs, both on grade and structural, and pavements.
ACI224 - Concrete Structures, Cracking In, Control Of
Cracks in concrete structures can indicate major structural problems and can mar the appearance of monolithic construction.
ACI244 - Concrete Structures, Cracking In, Control Of
ACI301 - Structural Concrete For Buildings
This reference specification covers cast-in-place structural concrete.
ACI302.1 - Concrete Floor And Slab Construction
This guide tells how to produce quality floors, platforms, patios, sidewalks, and driveways for various classes of service.
ACI303 - Architectural Concrete Practice, Guide To Cast-In-Place
This report presents general recommendations for the manufacture of cast-in-place architectural concrete.
ACI304 - Concrete, Measuring, Mixing, Transporting And Placing
ACI304.2 - Concrete, Placing By Pumping Methods
This guide outlines procedures for obtaining good results in measuring and mixing ingredients for concrete, transporting it to the site and placing it.
ACI304.3 - Concrete, Heavyweight: Measuring, Mixing, Transporting, And Placing
The procedures for measuring , mixing, transporting, and placing heavyweight concrete are similar to those used in conventional concrete construction; however special expertise and thorough planning are necessary for the successful completion of this type of concrete work.
ACI304.4 - Conveyor, Belt, Placing Concrete With
Concrete belt conveyors are specially designed or modified to transport plastic concrete from a supply source to forms or to other locations where it is placed without the use of additional equipment except that required for consolidations .
ACI304.5 - Concrete, Lightweight Batching, Mixing & Job Control Of
Concrete belt conveyors are specially designed or modified to transport plastic concrete from a supply source to forms or to other locations where it is placed without the use of additional equipment except that required for consolidation.
ACI305 - Concreting Hot Weather
Hot weather introduces problems in manufacturing, placing, and curing portland cement concrete that can adversely affect the properties and serviceablilty of the hardened concrete.
ACI306 - Concreting, Recommended Practice For Cold Weather
This report describes construction procedures which, if properly followed , can result in concrete placed in cold weather of sufficient strength and durability to satisfy intended service requirements.
ACI306.1 - Concreting, Cold Weather
This standard specification covers requirements for cold weather concreting and protection of concrete from freezing during the specified protection period.
ACI308 - Concrete, Standard Practice For Curing
This standard describes practices to be followed in curing concrete.
ACI309 - Concrete, Standard Practice For Consolidation
A mass of freshly mixed concrete as deposited in a form or mold is usually honeycombed with trapped air.
ACI311.4 - Concrete Inspection, Guide For
This section gives specific recommendations to the engineer in implementing inspection and testing programs.
ACI318/318 - Concrete Reinforced, Building Code Requirements For (See Notice Of Withdrawal For Superseding Information)
The American Concrete Institute "Building Code Requirements for Reinforced Concrete (ACI 318-83)" hereinafter referred to as the code, provides minimum requirements for any reinforced concrete design or construction that is regulated by a general building code of which it forms a part.
ACI336.2 - Footings And Mats, Combined, Suggested Analysis And Design Procedures For
Soil contact pressures, acting on a combined footing or mat, as well as the internal stresses produced by them, should be determined from one of the following combinations of loading, whichever produces the maximm value for the item under investigation.
ACI346/346 - Pipe, Concrete, Cast-In-Place Nonreinforced, Specification For, And Recommandations For Cast-In-Place Nonreinforced Concrete Pipe
These specifications cover construction of cast-in-place nonreinforced concrete pipe used for the conveyance of liquids such as irrigation water, storm water, sewage, and industrial wastes.
ACI347 - Concrete, Guide To Formwork For (See Notice Of Withdrawal For Superseding Information)
This recommended practice covers (a) preparation of contract plans and specifications; (b) design criteria for vertical and horizontal forces and lateral pressures; (c) design considerations including capacities of formwork accessories; (d) preparation of formwork design drawings; (e) construction and use of forms including safety considerations; (f) materials for formwork; and (g) formwork for special structures and special methods of construction.
ACI503 - Epoxy Compound With Concrete, Use Of
The rapid growth of the use of epoxy compounds in the concrete industry and the proliferation of available epoxy systems emphasizes the need of the present recommendation.
ACI506 - Shotcrete, Giode Tp
This guide covers many aspects of shotcrete construction including materials, equipment, crew organization, preliminary preparation.
ACI506.1 - Shotcrete, Fiber Reinforced, State-Of-The-Art Report On
Fiber reinforced shotcrete is mortar or concrete containing discontinuous discrete fibers that is pneumatically projected at high velocity onto a surface.
ACI506.2 - Shotcrete, Materials, Proportioning, And Application Of
This section covers the requirements for materials, proportioning, and application of shotcrete.
ACI506.3 - Guide To Certification Of Shotcrete Nosslemen
This guide has been prepared to assist those specifiers, public agencies, shotcrete applicators, shot-crete users, testing laboratories, and others who may find it desirable to broaden their own knowledge and/or to establish a procedure for training and certification of shotcrete nozzlemen.
ACI515.1 - Concrete, A Guide To The Use Of Waterproofing, Dampproofing, Protective And Decorative Barrier Systems For Concrete
Many concrete structures are designed and built to (1) contain water within the structure, or (2) maintain dry conditions within the structure when it is subject to water conditions on the outside.
ACI517.2 - Concrete, Accelerated Curing Of At Atmospheric Pressure - State Of The Art
Concrete products subjected to accelerated curing at atmospheric pressure use the same basic materials as normally cured concrete.
ACI544.1 - Concrete Fiber Reinforced, State Of The Art Report
Fiber reinforced concrete is concrete made of hydraulic cements containing fine or fine and coarse aggregate and discontinuous discrete fibers.
ACI544.2 - Concrete, Fiber Reinforced, Properties Of, Measurement Of
The methods suggested for testing fiber reinforced concrete are presented in an effort to standardize procedures and equipment so that results can be effectively evaluated and compared.
ACI-SP15 - Structural Concrete For Buildings
These specifications cover cast-in-place structural concrete for use in buildings and appurtenances.
ACI-SP66 - Aci Detailing Manual
AWWA-C104 - Cement, Mortar Lining For Ductile Iron Pipe And Fittings For Water
This standard covers shop-applied cement-mortar linings specified in the ANSI/AWWA C100/A21 series of standards for ductile-iron pipe and ductile-iron and gray-iron fittings for water, and is intended for use as a supplement to those standards.
AWWA-C205 - Cement Mortar Protective Lining & Coating For Steel Water Pipe - 4 Inch & Larger - Shop Applied
This standard covers the material, application, and curing requirements to provide protective linings and coatings for steel water pipe by shop application of cement mortar .
HH-F-334 - Filler, Expansion-Joint, Preformed, Nonextrudind-Bituminous-Fiber-Type (For Concrete) (S/S By Hh-F-341)
HH-F-341 - Filler, Expansion Joint, Bituminous (Asphalt And Tar) And Nonbituminous (Preformed For Concrete)
MIL-A-19903 - Asphalt, Petroleum, Roof Coating Compound Asbestos Fibered, Aluminum Pigmented
MIL-A-3029 - Asphalt, Waterproofing (For Use In Manufacture Of Fiber Ammunition Containers) (S/S By Astm-D449)
This specification covers one type of asphalt suitable for use in the manufacture of fiber containers for packing of ammunition.
MIL-A-52685 - Adhesive, Bonding, Chloroprene, Air Field Membrane Surfacing
This specification covers one type of adhesive for bonding chloroprene coated fabrics.
MIL-B-19235 - Bonding Compounds, Concrete (Rewettable) (Use Astm-C932)
MIL-C-83968 - Cement Mix, Fast Fix (S/S By Mil-C-83968)
MIL-C-83977 - Cement, Fast Setting
MIL-D-16680 - Deck Covering Magnesia Aggergate Mixture
This specification covers an asbestos-free deck covering used in galleys, pantries, and butcher shops aboard ship.
MIL-D-18873 - Deck Covering Magnesia Aggregate Mixture
This specification covers deck covering for use over wood floors in ammunition box cars or ammunition vans.
MIL-D-21631 - Deck Covering, Latex Concrete
This specification covers a non-sparking, fire retardant, latex concrete deck surfacing for use over aluminum or steel decking or between metallic channels in the holds of ammunition spaces.
MIL-D-23003 - Deck Covering Compound, Nonslip, Rollable (S/S By Mil-Prf-24667)
This specification covers rollable, nonslip, lightweight deck coverings for application to metal decks.
MIL-D-23134 - Deck Underlay And Covering, Insulating, Magnesia Aggregate Mixture
This specification covers an asbestos-free insulation underlayment and deck covering for use over such areas aboard ship as ballast tanks and hot machinery spaces.
MIL-D-24483 - Deck Covering, Spray-On, Nonslip (S/S By Mil-Prf-24667)
This specification applies to a spray-on, nonslip, lightweight deck covering for metal (or wood) decks.
MIL-D-3134 - Deck Covering Materials
This specification establishes the requirements for poured or pre-cast composition deck covering materials consisting of portland cement, or a synthetic or resinous binder that may include rock or glass chips. These deck coverings are intended for use on shipboard interior decks.
MIL-E-29245 - Epoxy Resin Systems For Concrete Repair (S/S By Astm-C881)
This specification covers epoxy resin systems for use in sealing, bonding, grouting, and repairing of portland cement concrete and in bonding and grouting of associated equipment, such as bolts, valves, and metal bars.
MIL-F-18176 - Flight Deck Compound, Nonslip, Lightweight, Abrasive Filled Synthetic Binder Type (Use Mil-D-23003)
MIL-F-52505 - Floor Coating, Resinous, Monolithic, Towel Type (For Concrete Floors)
MIL-G-20098 - Gypsum, Calcined
This specification covers calcined gypsum (calcium sulfate hemihydrate).
MIL-G-81830 - Grout Material, Rapid Setting (S/S By A-A-59607)
This specification covers the requirements for one type of rapid setting grout material.
MIL-I-23775 - Inert Load Binder For Drill Mines
This specification establishes the requirements for the procurement of Inert Load Binder for Drill Mines, for uses in applications wherein low magnetic permeability characteristics are required.
MIL-P-1227 - Primer And Enamel (Asphalt)
MIL-P-2886 - Plaster, Magnesia
MIL-PRF-24613 - Deck Covering Materials, Interior, Cosmetic Polymeric
This specification establishes the performance requirements for cosmetic polymeric deck covering materials to be applied either directly over primed or unprimed, clean steel and aluminum interior deck surfaces, or over deck covering underlay materials conforming to MIL-PRF-3135, that provide a wear resistant, low maintenance deck surface.
MIL-PRF-3135 - Deck Covering Underlay Materials
This specification establishes the performance requirements for deck covering underlay materials to be applied over primed or unprimed, clean steel and aluminum interior deck surfaces on naval vessels in order to provide a smooth, level, and/or properly sloped surface over which a final deck covering system will be applied.
MIL-Q-23774 - Quartzite Aggregate
MIL-R-83969 - Retarder, Fast Fix Cement
MIL-V-15196 - Vermiculite, Expanded (Pigmewnt) (S/S By Hh-I-585)
MIL-V-21628 - Vermiculite, Expanded (General Purpose) (Use Mil-V-23776)
MIL-V-23776 - Vermiculite, Expanded (Use Hh-I-585)
MIL-W-5044 - Walkway Compound, Nonslip And Walkway Matting, Nonslip (S/S By A-A-59166 And A-A-59124)
MIL-W-5050 - Walkway, Coating And Matting, Nonslip, Aircraft, Application Of (Asg)
This specification provides instructions for the application of smooth and rough walkway coatings and walkway matting to wingwalks of aircraft.
MMM-B-350 - Binder, Adhesive, Epoxy Resin, Flexible
MMM-G-650 - Grout, Adhesive, Epoxy Resin, Flexible, Filled
MS35651 - Asphalt, Petroleum, Top Coating Compound, Colors, Container Sizes, And Use Characteristics Thereof.
MS35712 - Enamel, Non-Skid, Color, Container Size, And Use Characteristics Thereof
QPL-16680-30 - Deck Covering Magnesia Aggregate Mixture
QPL-18176-10 - Flight Deck Compound, Non Slip, Lightweight, Abrasive Filled Synthetic Binder Type
QPL-18873-16 - Deck Covering Magnesia Aggregate Mixture
QPL-21631-36 - Deck Covering, Latex Concrete (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-23003-40 - Deck Covering Compound, Nonslip, Rollable
QPL-24483-31 - Deck Covering, Spray-On, Nonslip
QPL-24613-33 - Deck Covering Materials, Interior, Cosmetic Polymeric (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-3134-85 - Deck Covering Materials (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-3135-73 - Deck Covering Underlay Materials (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-5044-7 - Walkway, Coating And Matting, Nonslip, Aircraft
QPL-81830-6 - Grout Material, Rapid Setting
R-C-1424 - Coal Tar, (For Use In Road Construction)
R-P-355 - Pitch, Coal Tar Emulsion (Coating For Bituminous Pavements) (S/S By Astm-D5727)
R-P-381 - Pitch, Coal-Tar: (For) Aggregate-Surfaced Built-Up Roofing, Waterproofing And Dampproofing
R-T-143 - Tar, (For Use In) Road-Construction (Use R-C-1424)
SS-A-00692 - Asphalt, Petroleum (Roof Coating, Aluminum-Pigmented )Superseded By Tt-C-00498(
SS-A-281 - Aggregate, (For) Portland-Cement-Concrete (S/S By Astm-C33)
This specification covers aggregate for use in concrete (other than light-weight concrete).
SS-A-666 - Asphalt, Petroleum (Built-Up Roofing, Water-Proofing And Dampproofing)
This specification covers petroleum asphalt for use as hot-cement and mopping coat in the construction of built-up roof coverings, in dampproofing.
SS-A-671 - Asphalt, Liquid, Slow Curing, Medium Curing, And Rapid Curing
SS-A-674 - Asphalt, Paving, Emulsion
SS-A-694 - Asphalt Roof Coating (Brushing And Spraying Consistency) (Use Astm D 2823)
SS-A-696 - Asphalt, Petroleum, Type Paf-1-25, For Joint Filler (Squeegee Or Pouring Method)
SS-A-701 - Asphalt, Petroleum (Primer, Roofing, And Waterproofing)
SS-A-706 - Asphalt, Petroleum: Road And Pavement Construction (Asphalt Cement) (S/S By Astm-D946 & Astm-D3381)
SS-C-1302 - (
Images) Concrete Patching And Leveling Compound
This specification covers patching and leveling compounds for bonding to hardened concrete and other surfaces, including wood.
SS-C-153 - Cement, Bituminous, Plastic
SS-C-161 - Cement, Keenes (S/S By A-A-909)
SS-C-181 - Cement Masonry (Use Ss-C-1960/1)
SS-C-185 - Cement Natural, (For Use As A Blend With Portland Cement), Use Ss-C-1960/2
SS-C-188 - Cement, Plastic, Fatty Acid Pitch Base
SS-C-192 - Cement, Portland (Use Ss-C-1960/3)
SS-C-1960 - Cement And Pozzolan, General Requirements For
SS-C-1960/1 - Cement, Masonry (See Notice 1 For Replacement Information)
SS-C-1960/2 - Cement, Natural
SS-C-1960/3 - Cement, Portland (S/S By Astm-C150)
SS-C-1960/4 - Cement, Hydraulic, Blend (S/S Astm-C595)
SS-C-1960/5 - Pozzolan, For Use In Portland Cement Concrete (Use Astm-C618)
SS-C-197 - Cement, Portland, Blast Furnace Slag (Use Ss-C-1960)
SS-C-208 - Cement, Portland Pozzolan (Use Ss-C-1960)
SS-C-218 - Cement, Slag (Use Ss-C-1960)
SS-C-540 - Coal Tar (Cutback) Roof Coating, Brushing Consistency
This specification covers a coal tar base roof coating containing mineral filler or stabilizer and volatile solvent, suitable for brush application.
SS-C-618 - Concrete, Ready-Mixed (Use Astmc 94)
SS-C-726 - Crushed-Stone, Crushed-Gravel, And Crushed-Slag, (For) Binder-Course, Sheet-Asphalt-Pavement (S/S By Ss-S-445)
SS-C-731 - Crushed-Stone, Crushed-Gravel, And Crushed-Slag, (For) Bituminous-Concrete Base Or Surface-Course (S/S By Ss-S-445)
SS-C-736 - Crushed-Stone And Crushed-Slag, For Bituminous-Macadam Base Or Surface-Course (S/S By Ss-S-445)
SS-C-741 - Crushed Stone, Crushed Slag, And Gravel, For Bituminous Surface Treatment (S/S By Ss-S-445)
SS-C-743 - Crushed Stone, Crushed Slag, And Gravel, (For) Railroad Ballast (S/S By Ss-S-449)
SS-C-744 - Crushed Stone, Crushed Slag, And Gravel, (For) Sewage Tricking Filter Media (Supeseded By Ss-S-448)
SS-C-746 - Crushed Stone And Crushed Slag, For Water-Bound Base Or Wearing Course (S/S By Ss-S-445)
SS-G-1812 - Gilsonite, Natural Asphalt (Pavement Sealer)
SS-L-351 - Lime, Hydrated (For) Structural Purposes (S/S By Astm-C206 & Astm-C207)
SS-L-361 - Lime, Hydraulic, Hydrated (Use Astm C141)
SS-M-351 - Mineral Filler, (For) Sheet Asphalt Or Asphaltic Concrete Pavements (Portland Cement, Limestone Dust And Dolomite Dust)
SS-M-51 - Materials, (For) Cushion Course, Brick, Stone-Block, Or Wood-Block Pavements (Sand, Slag, Limestone, Screening, Etc.)
SS-P-00410 - Plaster, Gypsum (Keenes Cement) (Use Ss-C-161)
SS-P-00450 - Plaster, Patching, Gypsum, (Sparkling) (S/S By A-A-1272)
SS-P-402 - Plaster, Gypsum (S/S By Astm-C28/C28M And Astm-C587)
SSPC-SP11 - Tool, Power, Cleaning To Bare Metal Surface
SS-Q-351 - Quicklime, For Structural Purposes (Us/S Byastm-C5)
SS-R-406 - Road & Paving Materials, Methods Of Sampling & Testing
SS-R-451 - Roofing Coating, Asphalt, Brushing Consistency (S/S By Ss-A-694)
SS-S-00170 - Sealing Compound, Two-Components, Jet Fuel-Resistant Cold Applied, Concrete Paving
SS-S-111 - Sound Controlling Materials (Trowel & Spray Applications (Astm El042-85 Covers Requirement)
This specification covers acoustical materials for trowel or spray applications.
SS-S-445 - Slag, Stone And Gravel, Crushed (For Bituminous Paving Mixtures) (S/S By Astm-D692, Astm-D693 And Astm-D1139)
SS-S-448 - Slag And Stone, Crushed, Gravel, Crushed And Uncrushed (For Sewage Trickling Filter Media)
This specification covers crushed slag and stone, crushed and uncrushed gravel, used in sewage trickling filters.
SS-S-449 - Slag And Stone, Crushed, Grave, Crushed And Crushed (For Railroad Ballast)
This specification covers aggregates for ballast and subballast, in the construction of railroads.
SS-S-51 - Sand, (For) Cement&Mortar&Bed (For) Brick, Stone&Block Or Wood&Block Pavements
SS-S-61 - Sand, (For) Grout-Filler, Brick And Stone-Block Pavements.
SS-S-71 - Sand, For Use In Sheet-Asphalt Or Bituminous-Concrete Pavements (S/S By Astm-D1073)
SS-S-721 - Stone, Architectural, Cast
al Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QML-38535-20 - Integrated Circuits (Microcircuits) Manufacturing, General Requirements For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-38510-94 - Microcircuits, General Specification For (S/S By Qml-38535)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business